AUGER DRIVE ATTACHMENTS FOR EXCAVATORS, BACKHOES AND SKID-STEEER LOADERS
THE EBA RANGE OF AUGER DRIVE UNITS ALLOWS YOU TO QUICKLY CONVERT YOUR EXCAVATOR, BACKHOE OR SKID-STEER LOADER INTO A DRILL RIG BY SIMPLY CHANGING THE ATTACHMENT.
These auger drive units are ideal for drilling shallow holes in soft to compact soils, cobbles and in soft rock with compressive strengths up to 50 MPa. For use in harder rock, KEMROC have developed special drilling tools to ensure higher drilling speeds.
EBA-D range:
Direct drive, short and heavy duty construction, hexagonal drive shaft
EBA-P range:
Planetary gear drive, high torque in a compact size, square drive shaft.
Notes for drilling with KEMROC auger drive units: When mounted on an excavator arm, the augers are not supported in a feeder. Due to the natural curve of the excavator arm, augers can be bent during drilling. Therefore, special care must be taken to ensure that the augers are always working verctially. Only by keeping the auger in the vertical position can you guarantee a straight bore hole. Take great care to avoid bending the augers. Excessive bending of the auger can result in the hex drive breaking and damage to the auger drive. Select the auger rotation speed that corresponds to the auger diameter and material being drilled. Generally, rotation speeds should be lower for larger diameter augers or when drilling in harder material.
| EBA 150-P | EBA 300-P | EBA 700-P | EBA 500-D | EBA 1000-D | EBA 2300-D | EBA 2800-D | EBA 3500-P | EBA 6500-P |
|---|---|---|---|---|---|---|---|---|
| Recommended excavator weight: 1 – 2 t | Recommended excavator weight: 2 – 4 t | Recommended excavator weight: 5 – 7 t | Recommended excavator weight: 7 – 13 t | Recommended excavator weight: 14 – 17 t | Recommended excavator weight: 18 – 35 t | Recommended excavator weight: 25 – 40 t | Recommended excavator weight: 25 – 45 t | Recommended excavator weight: 25 – 50 t |
| Adaptable to skid-steer loaders: yes | Adaptable to skid-steer loaders: yes | Adaptable to skid-steer loaders: yes | Adaptable to skid-steer loaders: no | Adaptable to skid-steer loaders: no | Adaptable to skid-steer loaders: no | Adaptable to skid-steer loaders: no | Adaptable to skid-steer loaders: no | Adaptable to skid-steer loaders: no |
| Maximum drill diameter: 400 mm | Maximum drill diameter: 600 mm | Maximum drill diameter: 900 mm | Maximum drill diameter: 800 mm | Maximum drill diameter: 1,000 mm | Maximum drill diameter: 1,200 mm | Maximum drill diameter: 1,500 mm | Maximum drill diameter: 1,500 mm | Maximum drill diameter: 2,400 mm |
| Minimum drill diameter: 100 mm | Minimum drill diameter: 100 mm | Minimum drill diameter: 150 mm | Minimum drill diameter: 200 mm | Minimum drill diameter: 200 mm | Minimum drill diameter: 300 mm | Minimum drill diameter: 300 mm | Minimum drill diameter: 300 mm | Minimum drill diameter: 300 mm |
| DETAILS | DETAILS | DETAILS | DETAILS | DETAILS | DETAILS | DETAILS | DETAILS | DETAILS |
KEMROC Spezialmaschinen GmbH
Production and Service
Ahornstraße 6
36469 Hämbach
Germany
Phone +49 3695 850 2550
Fax +49 3695 850 2579
E-Mail info@kemroc.de